comes from superuser.com
ffmpeg -ss 00:00:30.0 -t 00:00:10.0 -i input.wmv -acodec copy -vcodec copy -async 1 output.wmv |
that is
-ss : start time
-t : duration after the start
comes from superuser.com
ffmpeg -ss 00:00:30.0 -t 00:00:10.0 -i input.wmv -acodec copy -vcodec copy -async 1 output.wmv |
that is
-ss : start time
-t : duration after the start
Hi, a few weeks ago I received the wi-fi receiver that I bought from ebay, which has a rt 5370 chipset. The receiver is plug-n-use (it has drivers in the kernel) in ubuntu 12.04 but my desktop could not recognize it. So here is how to install the drivers for it.
Warning : in case of a site crash keep your drivers folder in a safe place, because when you upgrade the kernel version you will need to recompile all of the driver files.
I used the steps in ubuntu forums located at here. However I was not successful at all. Then I tried to follow the steps in the installation readme file. I think the key point is :
$cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat |
See you.
*100# : Servis menuleri
*123# : Kalan kontoru gosterir
*100# : Telefon numrasını gösterir
##002# : Ayarlara reset atar
A good dya for me. I installed ubuntu 12.04 to my brand new laptop and afterwards I see that my ubuntu was booting into black screen. It is a dual boot with Win7. What I did many times is (in mixed order)
– Did a boot-repair
– Update initramfs
– Removed all nvidia packages
– Edit the boot option for “nomodeset”
– Edit the boot option for “no splash”
– Make a fresh reinstall, with internet off.
…. and many more none of them worked.
SOLUTION : I unplugged the receiver of my Logitech wireless mouse from the USB connector. It sounds weird but it works, at least for me.
Please kindly tell your comments.
That site was really helpful. As I see many people on the net copied this writing.
http://www.labnol.org/internet/get-google-voice-phone-number/18425/
Today I managed to install a stock ROM on my P7500. http://www.androidauthority.com/galaxy-tab-10-1-wi-fi-3g-gt-p7500-cyanogenmod-9-nightly-93525/ was really helpful for using Odin.
1- Run Odin v 1.85
2- Click PDA and select the md5 file you want to flash
3- Turn off your tab and turn it on in the download mode : Push power on and the volume down button at the same time
4- connect the tab to your USB of your PC.
5- Press volume up button. (more times if required)
6- Click Start in Odin. Let it go !!
/etc/fstab
# /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/sda1 / ext3 relatime,errors=remount-ro 0 1 #Entry for /dev/sda3 : UUID=7bf98501-4686-41fd-b7e3-151e78f05184 /home ext3 relatime,user_xattr 0 2 #Entry for /dev/sdb1 : #UUID=7618EFC718EF8509 /media/ANA_BOLUM ntfs-3g defaults,locale=en_US.utf8 0 0 #/dev/sda1 /media/C ntfs-3g defaults,locale=en_US.UTF-8 0 0 UUID=7618EFC718EF8509 /media/C ntfs-3g defaults,locale=en_US.utf8 0 0 #Entry for /dev/sda2 : UUID=A00DD53631EC6D2B /media/F ntfs-3g defaults,locale=en_US.utf8 0 0 #Entry for /dev/sdb2 : UUID=2FB80278A3F119B9 /media/D ntfs-3g defaults,locale=en_US.utf8 0 0 #Entry for /dev/sda4 : UUID=d8c7fd7d-f22c-4c5d-bff3-bb41eb2fc881 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 OR <code>/dev/sda3 /media/windows ntfs defaults 0 0</code> |
bir de önce ds-160 formu doldurulmalı sanırım
ABD Ankara Büyükelçiliği ve İstanbul Başkonsolosluğu, ABD’ye seyahat etmek isteyenlerin başvurularında yeni düzenlemelere gitti. Artık vize bavurularında randevu ve kurye ücreti ödenmeyecek.
ABD Büyükelçiliği tarafından yapılan yazılı açıklamada “19 Aralık 2012, Çarşamba gününden itibaren, başvuru sahipleri, ABD vizesi için başvuru randevularını üstlenici firma olan CSC aracılığı ile usvisa-info.com adresindeki websitemizden ya da (0850) 252-6355 numaralı telefonu arayarak yapabilirler. ABD’den arayan başvuru sahipleri (703) 439-2348 numaralı telefonu arayabilirler. Her iki telefona da yapılacak yerel aramalar ücretsizdir. Yeni sistemimizde randevu almak için ayrıca ücret ödemek gereği ortadan kalkacak ve randevu ücreti, vize başvuru ücretinin içinden tahsil edilecektir” denildi.
Telefonla randevu ve bilgi hizmetinin 19 Aralık 2012 tarihi itibarı ile başlayağı belirtilerek açıklamada “Başvuru sahipleri, çağrı ve bilgi merkezi aracılığıyla randevularını ilk 60 gün süresince Pazartesi-Cuma günleri 07:00-21:00 saatleri arasında, sonrasında ise 07:00-19:00 saatleri arasında alabilecekdirler. Aynı saatler ABD’den arayan başvuru sahipleri için de ilk 60 gün süresince Pazartesi-Cuma günleri 07:00-21:00 arasında, sonrasında ise 07:00-19:00 saatleri şeklinde geçerli olacaktır. Telefonla bilgi sistemi Türkçe, İngilizce ve Farsça olarak hizmet verecek, hem ABD Ankara Büyükelçiliği’nden hem de İstanbul Başkonsolosluğun’dan randevu alma imkanı sunacaktır.” ifadelerine yer verildi.
Yine 19 Aralık’tan itibaren, vize başvuru ücretlerini nakit olarak ödemek isteyen başvuru sahipleri, ödemelerini Türkiye genelinde 959 noktada hizmet veren Akbank şubelerinde TL olarak yapabilecek, kredi kartı ile ödeme yapmak isteyen başvuru sahipleri ise otomatik telefon sisteminden yararlanarak ABD Doları olarak ödeyebileceklerdir.
19 Aralık 2012 tarihinden itibaren, başvuru sahiplerinin pasaportları, başvuru sırasında seçmiş oldukları PTT şubesine gönderilecektir. Kurye ile gönderi için ayrıca ücret gerekmeyecek ve pasaport gönderi ücretleri başvuru ücretinin içinde tahsil edilecektir.
This link was very helpful indeed.
ALso make your printer shared through System -> Administration -> Printing right click your printer and make it shared accordingly.
I printed documents via Win 7 starter through my Ubuntu desktop.
QUOTE:
Another common use of Samba is to configure it to share printers installed, either locally or over the network, on an Ubuntu server. Similar to the section called “Samba File Server” this section will configure Samba to allow any client on the local network to use the installed printers without prompting for a username and password.
For a more secure configuration see the section called “Securing a Samba File and Print Server”.
Before installing and configuring Samba it is best to already have a working CUPS installation. See the section called “CUPS – Print Server” for details.
To install the samba package, from a terminal enter:
sudo apt-get install samba
After installing samba edit /etc/samba/smb.conf
. Change the workgroup attribute to what is appropriate for your network, and change security to share:
workgroup = EXAMPLE ... security = user
In the [printers] section change the guest ok option to yes:
browsable = yes guest ok = yes
After editing smb.conf
restart Samba:
sudo restart smbd sudo restart nmbd
The default Samba configuration will automatically share any printers installed. Simply install the printer locally on your Windows clients.
ADDITION:
On my 10.04 server I installed the printer drivers but now my 14.04 Laptop can not see the printer shared. So for my 14.04 I followed the steps told at http://ubuntuforums.org/showthread.php?t=1770014 My search term was Processing – Unable to connect to CIFS host, will retry in 60 seconds
After reading a discussion for opensuse I did the following.
Tools -> Preferences -> Proxy -> No proxy